Drones & Action / Variable ND Filter

Variable ND Filter

4.3 / 5 • Updated September 2026
Drones & Action

Representative image (stock photo); not the exact product.

Why Video Needs ND Filters

Video convention sets shutter speed at roughly double the frame rate — a fiftieth of a second at twenty-five frames — because that produces natural-looking motion blur.

Outdoors in daylight that combination badly overexposes unless the aperture is closed right down, which then produces deep focus and loses the shallow depth of field most people want.

An ND filter reduces light entering the lens, which lets you keep both the correct shutter speed and a wide aperture. It is a requirement for outdoor video rather than an accessory.

Variable Versus Fixed

A variable ND rotates to change density continuously, which means one filter covers a range and adjustment is instant as light changes.

Fixed NDs are single strengths, optically cleaner, and require swapping filters when light changes, which during a shoot is slow and means touching the lens repeatedly.

For run-and-gun video the convenience of variable usually wins; for careful landscape work where optical quality dominates and time is available, fixed filters are better.

The Cross Pattern Problem

Variable NDs work by rotating two polarising layers against each other, and at high density that produces a dark X-shaped band across the frame.

Every variable ND does this at its extreme end. Better ones have a marked usable range and a hard stop preventing rotation into the problem zone.

Staying within the marked range is the technique, and a filter without clear markings or a hard stop is considerably more likely to produce an unusable shot you only notice afterwards.

Colour Cast And Quality

Cheap variable NDs introduce colour casts, usually magenta or green, that shift as density changes, which is genuinely difficult to correct afterwards because it is not consistent.

Better filters maintain neutral colour across their range, and this is the main thing the extra cost buys along with sharpness.

A cheap filter in front of an expensive lens is a false economy, since the weakest optical element in the path determines the result.

Sizing And Practicalities

Buying a filter to fit your largest lens thread and using step-up rings for smaller lenses means one filter covers the whole kit.

That is considerably cheaper than a filter per lens and means only one filter to keep clean, with the minor inconvenience of fitting rings.

Lens hoods generally cannot be fitted over a variable ND that needs rotating, which means more flare risk, and shading the lens by hand or with a flag becomes the alternative.

Magnetic filter systems have largely solved the swapping problem that made fixed NDs inconvenient, using a base ring that stays on the lens and filters that click on and off in a second. That makes a set of fixed densities practical for run-and-gun work in a way screw-in filters never were, and for anybody prioritising optical quality it is now a genuine alternative to a variable rather than a theoretical one.

The Verdict

A requirement rather than an accessory for outdoor video, allowing correct shutter speed and wide aperture together in daylight.

Cheap versions produce shifting colour casts, every variable ND has a cross-pattern zone to avoid, and lens hoods usually cannot be used.

Stay inside the marked range. The X-pattern at maximum density ruins shots, and you often do not notice until editing.

At a glance

Pros

  • Allows correct shutter speed and wide aperture in daylight
  • Continuous adjustment as light changes, with no filter swapping
  • One filter with step-up rings covers a whole kit
  • Essential for any outdoor video work

Cons

  • Cross-shaped X pattern at maximum density
  • Cheap versions produce shifting colour casts
  • Optically less clean than fixed ND filters
  • Lens hoods usually cannot be fitted over it

Frequently asked questions

Why do I need one for video?

Because video shutter speed should be roughly double the frame rate for natural motion blur, and outdoors that overexposes badly unless you close the aperture right down — which loses the shallow depth of field you probably want.

What is the X pattern?

A dark cross-shaped band that appears at maximum density, caused by the two polarising layers. Every variable ND does it at the extreme end. Stay inside the marked usable range, and prefer filters with a hard stop.

Do I need one per lens?

No. Buy one to fit your largest lens thread and use step-up rings for the smaller ones. That is far cheaper and means one filter to keep clean, at the cost of fitting a ring when changing lenses.

Specifications

TypeVariable neutral density filter
PurposeCorrect shutter speed with wide aperture outdoors
MechanismTwo rotating polarising layers
LimitationX pattern at extreme density
Quality markerNeutral colour across the range
Versus fixedMore convenient, less optically clean
SizingLargest thread plus step-up rings
HoodGenerally incompatible

The bottom line

A requirement for outdoor video, not an accessory. Stay inside the marked range or the X pattern ruins shots you notice too late.

Check Price on Amazon